plotly.graph_objects.Waterfall

class plotly.graph_objects.Waterfall(arg=None, alignmentgroup=None, base=None, cliponaxis=None, connector=None, constraintext=None, customdata=None, customdatasrc=None, decreasing=None, dx=None, dy=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, increasing=None, insidetextanchor=None, insidetextfont=None, legendgroup=None, measure=None, measuresrc=None, meta=None, metasrc=None, name=None, offset=None, offsetgroup=None, offsetsrc=None, opacity=None, orientation=None, outsidetextfont=None, selectedpoints=None, showlegend=None, stream=None, text=None, textangle=None, textfont=None, textinfo=None, textposition=None, textpositionsrc=None, textsrc=None, texttemplate=None, texttemplatesrc=None, totals=None, uid=None, uirevision=None, visible=None, width=None, widthsrc=None, x=None, x0=None, xaxis=None, xsrc=None, y=None, y0=None, yaxis=None, ysrc=None, **kwargs)
__init__(arg=None, alignmentgroup=None, base=None, cliponaxis=None, connector=None, constraintext=None, customdata=None, customdatasrc=None, decreasing=None, dx=None, dy=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, increasing=None, insidetextanchor=None, insidetextfont=None, legendgroup=None, measure=None, measuresrc=None, meta=None, metasrc=None, name=None, offset=None, offsetgroup=None, offsetsrc=None, opacity=None, orientation=None, outsidetextfont=None, selectedpoints=None, showlegend=None, stream=None, text=None, textangle=None, textfont=None, textinfo=None, textposition=None, textpositionsrc=None, textsrc=None, texttemplate=None, texttemplatesrc=None, totals=None, uid=None, uirevision=None, visible=None, width=None, widthsrc=None, x=None, x0=None, xaxis=None, xsrc=None, y=None, y0=None, yaxis=None, ysrc=None, **kwargs)

Construct a new Waterfall object

Draws waterfall trace which is useful graph to displays the contribution of various elements (either positive or negative) in a bar chart. The data visualized by the span of the bars is set in y if orientation is set th “v” (the default) and the labels are set in x. By setting orientation to “h”, the roles are interchanged.

Parameters
  • arg – dict of properties compatible with this constructor or an instance of plotly.graph_objects.Waterfall

  • alignmentgroup – Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently.

  • base – Sets where the bar base is drawn (in position axis units).

  • cliponaxis – Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set xaxis.layer and yaxis.layer to below traces.

  • connectorplotly.graph_objects.waterfall.Connector instance or dict with compatible properties

  • constraintext – Constrain the size of text inside or outside a bar to be no larger than the bar itself.

  • customdata – Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, “scatter” traces also appends customdata items in the markers DOM elements

  • customdatasrc – Sets the source reference on Chart Studio Cloud for customdata .

  • decreasingplotly.graph_objects.waterfall.Decreasing instance or dict with compatible properties

  • dx – Sets the x coordinate step. See x0 for more info.

  • dy – Sets the y coordinate step. See y0 for more info.

  • hoverinfo – Determines which trace information appear on hover. If none or skip are set, no information is displayed upon hovering. But, if none is set, click and hover events are still fired.

  • hoverinfosrc – Sets the source reference on Chart Studio Cloud for hoverinfo .

  • hoverlabelplotly.graph_objects.waterfall.Hoverlabel instance or dict with compatible properties

  • hovertemplate – Template string used for rendering the information that appear on hover box. Note that this will override hoverinfo. Variables are inserted using %{variable}, for example “y: %{y}”. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time- format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-3.x-api- reference/blob/master/Time-Formatting.md#format for details on the date formatting syntax. The variables available in hovertemplate are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, every attributes that can be specified per-point (the ones that are arrayOk: true) are available. variables initial, delta and final. Anything contained in tag <extra> is displayed in the secondary box, for example “<extra>{fullData.name}</extra>”. To hide the secondary box completely, use an empty tag <extra></extra>.

  • hovertemplatesrc – Sets the source reference on Chart Studio Cloud for hovertemplate .

  • hovertext – Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace’s (x,y) coordinates. To be seen, trace hoverinfo must contain a “text” flag.

  • hovertextsrc – Sets the source reference on Chart Studio Cloud for hovertext .

  • ids – Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

  • idssrc – Sets the source reference on Chart Studio Cloud for ids .

  • increasingplotly.graph_objects.waterfall.Increasing instance or dict with compatible properties

  • insidetextanchor – Determines if texts are kept at center or start/end points in textposition “inside” mode.

  • insidetextfont – Sets the font used for text lying inside the bar.

  • legendgroup – Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

  • measure – An array containing types of values. By default the values are considered as ‘relative’. However; it is possible to use ‘total’ to compute the sums. Also ‘absolute’ could be applied to reset the computed total or to declare an initial value where needed.

  • measuresrc – Sets the source reference on Chart Studio Cloud for measure .

  • meta – Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace name, graph, axis and colorbar title.text, annotation text rangeselector, updatemenues and sliders label text all support meta. To access the trace meta values in an attribute in the same trace, simply use %{meta[i]} where i is the index or key of the meta item in question. To access trace meta in layout attributes, use %{data[n[.meta[i]} where i is the index or key of the meta and n is the trace index.

  • metasrc – Sets the source reference on Chart Studio Cloud for meta .

  • name – Sets the trace name. The trace name appear as the legend item and on hover.

  • offset – Shifts the position where the bar is drawn (in position axis units). In “group” barmode, traces that set “offset” will be excluded and drawn in “overlay” mode instead.

  • offsetgroup – Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up.

  • offsetsrc – Sets the source reference on Chart Studio Cloud for offset .

  • opacity – Sets the opacity of the trace.

  • orientation – Sets the orientation of the bars. With “v” (“h”), the value of the each bar spans along the vertical (horizontal).

  • outsidetextfont – Sets the font used for text lying outside the bar.

  • selectedpoints – Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the unselected are turned on for all points, whereas, any other non-array values means no selection all where the selected and unselected styles have no effect.

  • showlegend – Determines whether or not an item corresponding to this trace is shown in the legend.

  • streamplotly.graph_objects.waterfall.Stream instance or dict with compatible properties

  • text – Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace’s (x,y) coordinates. If trace hoverinfo contains a “text” flag and “hovertext” is not set, these elements will be seen in the hover labels.

  • textangle – Sets the angle of the tick labels with respect to the bar. For example, a tickangle of -90 draws the tick labels vertically. With “auto” the texts may automatically be rotated to fit with the maximum size in bars.

  • textfont – Sets the font used for text.

  • textinfo – Determines which trace information appear on the graph. In the case of having multiple waterfalls, totals are computed separately (per trace).

  • textposition – Specifies the location of the text. “inside” positions text inside, next to the bar end (rotated and scaled if needed). “outside” positions text outside, next to the bar end (scaled if needed), unless there is another bar stacked on this one, then the text gets pushed inside. “auto” tries to position text inside the bar, but if the bar is too small and no bar is stacked on this one the text is moved outside.

  • textpositionsrc – Sets the source reference on Chart Studio Cloud for textposition .

  • textsrc – Sets the source reference on Chart Studio Cloud for text .

  • texttemplate – Template string used for rendering the information text that appear on points. Note that this will override textinfo. Variables are inserted using %{variable}, for example “y: %{y}”. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time- format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-3.x-api- reference/blob/master/Time-Formatting.md#format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are arrayOk: true) are available. variables initial, delta, final and label.

  • texttemplatesrc – Sets the source reference on Chart Studio Cloud for texttemplate .

  • totalsplotly.graph_objects.waterfall.Totals instance or dict with compatible properties

  • uid – Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

  • uirevision – Controls persistence of some user-driven changes to the trace: constraintrange in parcoords traces, as well as some editable: true modifications such as name and colorbar.title. Defaults to layout.uirevision. Note that other user-driven trace attribute changes are controlled by layout attributes: trace.visible is controlled by layout.legend.uirevision, selectedpoints is controlled by layout.selectionrevision, and colorbar.(x|y) (accessible with config: {editable: true}) is controlled by layout.editrevision. Trace changes are tracked by uid, which only falls back on trace index if no uid is provided. So if your app can add/remove traces before the end of the data array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a uid that stays with it as it moves.

  • visible – Determines whether or not this trace is visible. If “legendonly”, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

  • width – Sets the bar width (in position axis units).

  • widthsrc – Sets the source reference on Chart Studio Cloud for width .

  • x – Sets the x coordinates.

  • x0 – Alternate to x. Builds a linear space of x coordinates. Use with dx where x0 is the starting coordinate and dx the step.

  • xaxis – Sets a reference between this trace’s x coordinates and a 2D cartesian x axis. If “x” (the default value), the x coordinates refer to layout.xaxis. If “x2”, the x coordinates refer to layout.xaxis2, and so on.

  • xsrc – Sets the source reference on Chart Studio Cloud for x .

  • y – Sets the y coordinates.

  • y0 – Alternate to y. Builds a linear space of y coordinates. Use with dy where y0 is the starting coordinate and dy the step.

  • yaxis – Sets a reference between this trace’s y coordinates and a 2D cartesian y axis. If “y” (the default value), the y coordinates refer to layout.yaxis. If “y2”, the y coordinates refer to layout.yaxis2, and so on.

  • ysrc – Sets the source reference on Chart Studio Cloud for y .

Returns

Return type

Waterfall